Revealed online on 28 October 2020, the Bugatti Bolide was a drivable experimental one-off — never originally intended for production. MR Collection's 1:18 scale model captures the concept in Full Carbon Matt, a fully exposed matte carbon-fibre livery distinct from the French Racing Blue colourway used at the October 2020 unveiling. With a worldwide edition run of just 149 pieces, it is one of the more tightly capped variants in MR Collection's Bolide series.
The 8.0-Litre W16 in Its Most Extreme Form
The Bolide was Bugatti's answer to a single engineering question: what is the lightest possible car that can be built around the 8.0-litre quad-turbocharged W16? The result was a track-only vehicle with a dry weight of 1,240 kg, a weight-to-power ratio of 0.67 kg/PS, and a simulated Nürburgring Nordschleife lap of 5:23.1 minutes — all concept-stage computer figures, not measured results. At 320 km/h the rear wing alone generates 1,800 kg of downforce. Bugatti has since confirmed the Bolide is the last car to use the W16 with four turbochargers, closing a chapter in hypercar engineering.
Concept Spec, Not the Production Car
This model represents the 2020 one-off concept at its full 1,850 PS output on 110-octane racing fuel — not the 40-unit production version announced at The Quail in August 2021, which was detuned to 1,600 PS on 98 RON fuel and weighs 210 kg more. The Full Carbon Matt finish echoes the bare-carbon prototype aesthetic and is the most technically austere of the five additional Bolide colourways in MR Collection's series. The carbon-fibre monocoque of the real car met FIA Formula 3-equivalent safety standards and incorporated 3D-printed titanium structural components.
MR Collection Resin: Construction and Finish
MR Collection produced this replica in resin — the material of choice for reproducing complex aerodynamic surfaces such as the Bolide's layered front splitter, sculpted rear wing, and exposed carbon-weave bodywork. The model has no opening parts; the body is a fully sealed one-piece structure, and surface fidelity is concentrated on the exterior aerodynamic geometry. It is supplied with a fitted display base and a high-end plexiglass showcase, both included as standard.
In the Display Cabinet
At approximately 26.9 cm in length, the model demands a shelf depth of at least 15 cm. The matte carbon finish reads well under neutral or cool lighting, which avoids washing out the weave texture. Within a Bugatti hypercar collection it sits alongside MR Collection's Chiron, Divo, and Centodieci — all Chiron-platform W16 derivatives at 1:18 scale. For collectors who also work in 1:43, Looksmart produced a matching Full Carbon Matt Bolide as a direct companion piece.
Häufig gestellte Fragen
How big is the 1:18 scale model?
The Bugatti Bolide measures 4,835 mm in length, giving a 1:18 scale model length of approximately 26.9 cm. Allow a shelf depth of at least 15 cm; the wide bodywork (2,100 mm in real life, or around 11.7 cm at scale) means the model takes up meaningful lateral display space as well.
Does the model have opening parts?
No. This is a fully sealed one-piece resin body with no opening doors, bonnet, or engine cover. The detail is concentrated on the exterior surfaces: the aerodynamic bodywork, layered splitter, rear wing, and the matte exposed-carbon finish that covers the entire car.
What is the edition size, and does the model come with a display case?
The edition is limited to 149 pieces worldwide. Each model is supplied with a fitted display base and a high-end plexiglass showcase, both included as standard with the model.
Does this model represent the production Bolide or the 2020 concept?
It represents the original 2020 experimental concept at 1,850 PS on 110-octane racing fuel and a dry weight of 1,240 kg — not the 40-unit production car announced in August 2021, which produces 1,600 PS and weighs 1,450 kg.